https://stream.echo6.co/videos/watch/3f84f1a5-2b89-4dd2-8aff-b334ce47a301 Detailed steps (yes, it's a long video) required to setup DragonOS LTS, KerberosSDR, and the RTL-SDR to simultaneously monitor air traffic control, ADS-B, ACARS, VDL2, while also decoding radio transmissions with rtl_433. You could use five separate RTL-SDR dongles, but I happened to have a single RTL-SDR + KerberosSDR which is essentially four RTL-SDR dongles in one box. The idea for this was orginally posted on rtl-sdr.com for use with a Raspberry Pi and KerberosSDR. I modified the process to work with x86, replaced Dump1090 with ADS-B in Kismet, and added in rtl_433. You could set up everything on DragonOS 10, but you would need to install rtl_433 which is not covered in this video due to it already being a part of DragonOS LTS. Check out the ShinySDR part 2 video I uploaded, it shows how to install rtl_433 as a reference. Don’t forget to also use “sudo su -“ with the dash on DragonOS 10. Links to original tutorial and all required packages: https://www.rtl-sdr.com/using-a-kerberossdr-to-monitor-air-traffic-control-voice-ads-b-acars-vdl2-simultaneously-on-a-raspberry-pi-3b/ https://sourceforge.net/projects/dragonos-lts/ https://github.com/szpajder/RTLSDR-Airband http://xdeco.org/?page_id=30 https://github.com/szpajder/libacars https://github.com/szpajder/dumpvdl2 https://github.com/merbanan/rtl_433 https://kismetwireless.net Mon, 13 Apr 2026 11:38:58 GMT https://validator.w3.org/feed/docs/rss2.html PeerTube - https://stream.echo6.co https://stream.echo6.co/client/assets/images/icons/icon-512x512.png https://stream.echo6.co/videos/watch/3f84f1a5-2b89-4dd2-8aff-b334ce47a301 All rights reserved, unless otherwise specified in the terms specified at https://stream.echo6.co/about and potential licenses granted by each content's rightholder.