https://stream.echo6.co/videos/watch/8659c3d1-5977-49fe-9366-b659d1e9c167 This video goes over how to setup and use OpenVPN on DragonOS Focal and directly on the PlutoSDR using the latest DragonSDR firmware. The PlutoSDR used an USB Ethernet adapter to plug into a GL-iNet 750M router serving as a wireless access point. DragonOS Focal was on a laptop and wirelessly connected to the access point.Traffic between the PlutoSDR and the laptop was then encrypted with OpenVPN. This allows the PlutoSDR and SigDigger's Suscli server to be securely and remotely connected to DragonOS Focal. I show how SigDigger can receive the steam from Suscli and the PlutoSDR. I used the Ham It Up and YouLoop to extend the lower range of the PlutoSDR with the 70Mhz - 6Ghz modification. Additionally I go over how to use the Pluto-firmware-modification kit to extract and customize the DragonSDR firmware. Just note, I did not flash the modified firmware yet, so make sure you're familiar with the PlutoSDR firmware recovery methods should anything get messed up. As long as you edit the files and zip back up the folder structure, everything should be okay. Latest DragonSDR firmware with NTP and NTPDate: https://drive.google.com/drive/folders/1q8FqKho6ps32drDDXErBEbYu6ccng2LA The following projects were used in this video, https://sourceforge.net/projects/dragonos-focal/files/, https://github.com/BatchDrake/SigDigger, https://github.com/Nyr/openvpn-install, https://github.com/daniestevez/pluto-firmware-modifications, Hardware used: PlutoSDR revC Ham It Up YouLoop Sun, 26 Apr 2026 14:42:51 GMT https://validator.w3.org/feed/docs/rss2.html PeerTube - https://stream.echo6.co https://stream.echo6.co/client/assets/images/icons/icon-512x512.png https://stream.echo6.co/videos/watch/8659c3d1-5977-49fe-9366-b659d1e9c167 All rights reserved, unless otherwise specified in the terms specified at https://stream.echo6.co/about and potential licenses granted by each content's rightholder.