<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
    <channel>
        <title>How to Install a Water Saving Toilet | Ask This Old House</title>
        <link>https://stream.echo6.co/videos/watch/b481e992-da3c-4446-abeb-0367f4070108</link>
        <description>Ask This Old House plumbing and heating expert Richard Trethewey replaces an old toilet with a "Water Sense" solution. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2 hours Cost: $250 Skill Level: Moderate Tools List for Installing a Water Saving Toilet: Open ended adjustable wrench Putty knife Mini hacksaw Shopping List: Dual-flush toilet Bucket Sponge Gloves Closet bolts, closet nuts, and closet washers Wax ring Toilet caps Caulking Steps: Shut the water off at the toilet. The shut off valve should be to the left of the toilet., Flush the toilet to drain out as much water as possible. The rest can be removed with a sponge and a bucket., Break the water connection from the hose to the toilet tank. It usually can be loosened with hands alone., Use the open ended adjustable wrench to loosen the closet bolts on both sides of the toilet. Remove the nut and the washer., Use the grips under the toilet to carefully lift the toilet straight up off the bolts., Wearing gloves, remove the wax around the flange using a putty knife., Check to ensure the closet flange is intact. Replace if it is broken., Assemble the new toilet using brass tank bolts and the tank to bowl gasket, both of which should be included with the toilet., Attach the new toilet seat to the bowl., Insert new closet bolts into the flange., Add a new wax ring to the flange., Carefully put the new toilet back on the flange and push to set into the wax ring., Add the toilet cap base to the closet bolts on both sides., Put the washer and nut back on the closet bolts. Secure them on both sides with the open-ended adjustable wrench. Take turns securing each side and do not overtighten to prevent damaging the toilet., Use the mini hacksaw to carefully cut the closet bolts close to the nut., Add the toilet cap to the closet bolt. It should snap right into the cap base., Hand tighten the water connection back to the toilet., Turn the water back on., Use caulking around the bottom of the toilet., About Ask This Old House TV: Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook. Follow This Old House and Ask This Old House: Facebook: http://bit.ly/ThisOldHouseFB Twitter: http://bit.ly/ThisOldHouseTwitter http://bit.ly/AskTOHTwitter Pinterest: http://bit.ly/ThisOldHousePinterest Instagram: http://bit.ly/ThisOldHouseIG http://bit.ly/AskTOHIG Tumblr: http://bit.ly/ThisOldHouseTumblr For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite How to Install a Water Saving Toilet | Ask This Old House https://www.youtube.com/user/thisoldhouse/</description>
        <lastBuildDate>Sun, 17 May 2026 05:25:51 GMT</lastBuildDate>
        <docs>https://validator.w3.org/feed/docs/rss2.html</docs>
        <generator>PeerTube - https://stream.echo6.co</generator>
        <image>
            <title>How to Install a Water Saving Toilet | Ask This Old House</title>
            <url>https://stream.echo6.co/client/assets/images/icons/icon-512x512.png</url>
            <link>https://stream.echo6.co/videos/watch/b481e992-da3c-4446-abeb-0367f4070108</link>
        </image>
        <copyright>All rights reserved, unless otherwise specified in the terms specified at https://stream.echo6.co/about and potential licenses granted by each content's rightholder.</copyright>
        <atom:link href="https://stream.echo6.co/feeds/video-comments.xml?videoId=b481e992-da3c-4446-abeb-0367f4070108" rel="self" type="application/rss+xml"/>
    </channel>
</rss>