https://stream.echo6.co/videos/watch/e2af217f-a24a-49ab-87bb-d0007948d1bd Ask This Old House host Kevin O’Connor builds a table with Jimmy DiResta, a maker who’s famous online for how-to videos. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Check out Jimmy's channel for more: https://www.youtube.com/user/jimmydiresta Time: 3 hours Cost: $75 Skill Level: Moderate Tools: Bandsaw Welder Grinder Table saw Hot glue gun Belt sander Paintbrush Shopping List: 1” angle iron 3/4” round bar stock steel MDF Tree branches Hot glue sticks 2-part epoxy Low grit sandpaper Acetone Rags Foam brush Chemical blackener Spray lacquer Painters tape Steps: Cut the angle iron to length, in this case 16”. Next, make L-shaped cuts on both ends of two of the pieces., Cut the round bar stock to length, in this case 16”., Weld the angle iron into a frame. Smooth out the welds with a grinder., Weld the 3/4” round bar stock to the frame as legs., Cut out a piece of MDF to fit the size of the metal frame. Grind off a small chunk of the four corners to ensure a tight fit over the welded joints., Place the MDF in the tray. It should be recessed at least 1/4” to leave room for the slices., Cut the tree branches up into small slices on the band saw. Be sure to cut branches with a variety of diameters., Seal the gap between the MDF and the metal frame with hot glue., Pour a generous amount of 2-part epoxy on top of the MDF and spread it out until the top is completely covered., Place the wood slices on top of the table. Let the table cure for two hours., Once the epoxy has set, sand the table smooth using a belt sander, then a palm sander., Finish the top with more of the 2-part epoxy. Apply it with a paintbrush and let it cure for 24 hours., Lightly sand the metal frame and legs and clean it up with acetone using the rags., Apply the chemical blackener to the legs with the foam brush., Finish off the metal frame and legs with the spray-on lacquer. Use painter’s tape on the slice top to protect it while spraying., Resources: Most of the materials Jimmy and Kevin used to make the table, including the stock steel and mdf board can all be found at home centers. Jimmy used sticks from his backyard for the wood slices. The two-part epoxy that Jimmy used for the top is Famowood Glaze Coat, manufactured by Eclectic Products (http://eclecticproducts.com/). Jimmy used welding equipment and safety gear manufactured by Lincoln Electric (http://www.lincolnelectric.com). Build It: This Old House general contractor Tom Silva, This Old House host Kevin O’Connor, and special guests including Jimmy DiResta, take you through step-by-step DIY projects in this popular video series. From end-tables to cutting boards to wine racks to chicken coops and more, learn how to build from the best pros in the game. Segments include mention of all tools and materials needed to get the job done. Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free. https://bit.ly/2GPiYbH   Plus, download our app for streaming full episodes to your connected TV, phone or tablet: https://bit.ly/34RYEP5 Follow This Old House and Ask This Old House: Facebook: http://bit.ly/ThisOldHouseFB Twitter: http://bit.ly/ThisOldHouseTwitter http://bit.ly/AskTOHTwitter Pinterest: http://bit.ly/ThisOldHousePinterest Instagram: http://bit.ly/ThisOldHouseIG http://bit.ly/AskTOHIG For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite Sliced Twig Table with Jimmy DiResta | Build It | Ask This Old House https://www.youtube.com/user/thisoldhouse/ Sun, 17 May 2026 05:26:47 GMT https://validator.w3.org/feed/docs/rss2.html PeerTube - https://stream.echo6.co https://stream.echo6.co/client/assets/images/icons/icon-512x512.png https://stream.echo6.co/videos/watch/e2af217f-a24a-49ab-87bb-d0007948d1bd All rights reserved, unless otherwise specified in the terms specified at https://stream.echo6.co/about and potential licenses granted by each content's rightholder.